Cleated Conveyor Belt
The baffle conveyor belt is also called wave rib belt, large Angle wave rib belt, skirt belt, which is composed of 3 parts: base band, rib and transverse diaphragm. The guard is used to prevent material from sliding and falling. In order to facilitate the bypass of the drum, the protective edge is designed to be corrugated; The function of the transverse partition of the conveyor belt is to support the material. In order to achieve large Angle transmission, T type and TC type are used. The conveyor belt side and transverse baffle are connected with the baseband by the method of secondary vulcanization, and the rib height is 60-500mm.
Description
The base band of the baffle conveyor belt requires a certain tensile strength and wear resistance. Among them, for the baffle conveyor belt with empty side, in order to adapt to the requirements of Angle change, the longitudinal tape should be soft, and the transverse tape should be rigid.
Baseband structure
The base band consists of four parts: upper cover, lower cover, core and transverse rigid layer. The thickness of the covering glue is generally 3-6mm; The thickness of the lower covering rubber is generally 1.5-4.5mm, the core material can withstand the tension, and the material can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or steel wire rope (ST). In order to increase the transverse stiffness of the baseband, a special reinforcing layer, called the transverse rigidity layer, is added above and below the core. The width of the baseband is the same as that of ordinary tape.
Additional information
| Weight | 36 kg |
|---|---|
| Dimensions | 25 × 25 × 25 cm |
| Warranty | 6 months |
| Fabric | Cotton, Silk & Synthetic |
| Color | Read, Blue, Green & Black |
Reviews
There are no reviews yet.